Our lives revolve around connecting to the internet, preferably Wi-Fi. All of them will be faced with the fight against the “corner, where there is no pending or to the room where the signal is too slow” to avoid these problems, you can do so strategically and to identify the location of the house, where it to put. ruteri, since it is the device that connects the local network to the internet.
Optimisation of the intake is a matter of physics, electromagnetic waves, but that would translate into action the very simple to follow. It was made by Jason Cole, a student, a doctoral student in physics at Imperial College London, who settled the equation of Helmholtz, it is used to design the electromagnetic fields, and came to the conclusion, and not much of a surprise!) the perfect place to determine ruteri is at the heart of the home. But it's not enough.
Where to put the ruterin Wi-Fi
The placement of the routerit Wi-Fi in the living room on the main home and your needs to ensure an equitable distribution of the signal, and, but not limited to the dead area, i.e. the area where the acceptance is virtually zero. An order of the general, which needs to be kept in mind is to make sure that the device you are using to “see” ruterin, without any of the major obstacles in the middle.
The principal means of communicating wirelessly with what we're used to, in fact, the use of the waves are electromagnetic, which could be absorbed easily by the materials such as the concrete, the armuar, or bricks. In other words, the signal switches off, but you can't reach on your pc, or tabletin the destination, because it was still the first time. The same problem may occur with the pipes, cables, electricity, and the structure of the wood or the metal inside of a wall.
The rules for the establishment of the ruterit Wi-Fi
Therefore, all of the material, which can absorb the electromagnetic wave must be removed or bypassed.
On a practical level, a ruter don't have to hide it in a dollapi, or masquerades in a dividing way, both for aesthetic reasons. Also, it should be placed at the top of a mobiljeje, or a shelf in the way that it should be at least one meter from the ground, which, on the other hand, it can also act as a barrier to the transmission of the signal.
In order to deal with boundaries that are not to be present in a house, you can play around with the angle of refraction, and to create the waves are electromagnetic, when it kërcehet from a surface of the transparent, as well as in the air, or glass. In other words, you can also try to move the ruterin inch after inch, until you find the position of the optimum for the link.
How to avoid the noise electromagnetic
The Problem is not only the obstacles of the physical, some household appliances commonly used, such as watching television, mikrovala at work or in your phone without wires, for those of use still use the belt to 2.4 GHz, the same frequency to be shared by the vast majority of the ruterëve to a Wi-Fi connection . So, the placement of the equipment in the kitchen, or in the cabinet and the tv runs the risk of encouraging interference between signals, the so-called waves are electromagnetic.
Ruterët more recently, however, working with a technology company to a double, which allows them to use the belt for 5 GHz, which is usually a little less busy. However, the idealja is that both are active; the second, in fact, is influenced the most by any obstacle between the source signal and the device you should take it.
Discussion about this post